Unpair tecla-e from all Bluetooth devices

If you would like to clear all your tecla-e Bluetooth connections, follow the steps below. Keep in mind that as soon as you clear the connections, tecla-e won't be able to connect to any Bluetooth device until you pair to a device.

Step 1

Device	Description	Feedback
tecla-e	Turn off tecla-e	All lights off, no sounds

Step 2 

Device	Description	Feedback
Target  Device	Open the Bluetooth menu, select more information from tecla-e and select “Forget This Device”

Step 3 

Device	Description	Feedback
Target Device	Turn Bluetooth Off

Step 4

Device	Description	Feedback
Target Device	Repeat steps 2&3 for each device you have paired with tecla-e

Step 5

Device	Description	Feedback
tecla-e	Turn on tecla-e, moving the 3-way switch to the middle position indicated by (I)	tecla-e indicator light will go on and a sound will play indicated that is ready.
tecla-e	Slide and hold 3-way switch to the left position (Gear) for 20 seconds	Ignore the pairing tone at 5-sec, tecla-e status light will flash red 3 times, and play a downwards tritone to denote that it has been reset.
tecla-e	Turn tecla-e device on and off.	tecla-e will restart and be ready to pair again.

Troubleshooting:

• Try resetting the tecla-e a second or third time.