Wheelchair driving controls & tecla-e

In order to use the wheelchair driving controls to control your devices, you need to have compatible wireless driving controls or the chair needs to be equipped with an Environmental Control Unit (ECU) or Input/Output Module (IOM), this is an add-on for wheelchairs that allows them to control external devices.

 

From the ECU or IOM you can connect directly to the tecla-e wheelchair port using a DB9 Male to Female cable (serial).

Wireless Wheelchair Control: The new ATOM wheelchair driving controls from Adaptive Switches Laboratories (ASL) wirelessly connect to tecla-e, so there is no need to connect tecla-e to the wheelchair electronics.

http://www.asl-inc.com/products/product_detail.php?prod=191

Environmental Control Unit or Input/Output Module

See the compatibility table below for more information on what electronics your chair needs to connect to the tecla-e if you don't have wireless driving controls:  

Brand Electronics Device Acronym Model
Invacare MK6i AUXILIARY MODULE 12
AUXILIARY MODULE 34
AUX

AUX12M6


AUX34M6

Quantum Rehab Q Logic ECU Module ECU KITASMB1696 (Includes Bus Cable)
Permobil R-Net OUTPUT MODULE (IOM) FOR R-NET IOM I10582
Sunrise R-Net OUTPUT MODULE (IOM) FOR R-NET IOM I10583
Amy Systems R-Net OUTPUT MODULE (IOM) FOR R-NET IOM I10584
 Invacare (Europe) Dynamic Controls DX-ECU Environmental Control Unit   DX-ECU
Have more questions? Submit a request

Comments