This mount is designed specifically for the tecla-e. The tecla-e mount locks the device into place on your mobility device for a strong and secure hold.
Please note that when in the mount, the built-in switch is disabled to prevent accidental presses. If you need access to the switch when mounted, tecla-e has a standard camera mount socket at the base to be mounted in any compatible camera mount.
2. Add the padding to the wheelchair clasp.
3. Mount the clasp to the back tubing on your wheelchair and with a hex key begin tightening the screws to secure it in place.
4. You may now attach the tecla-e mount. It magnetically fastens to the tubing mount and may require a quarter turn of the dial on the back of the mount.
5. Slide the tecla-e into the mount from the top and rotate the locking tab up to secure the tecla-e in place. You can now turn on your tecla-e and begin the set-up process with your device.