Connect tecla-e to Fusion / ATOM Head Arrays driving controls

You can wirelessly connect your Fusion or ATOM head array from ASL to your tecla-e to use them as your switches.

Please follow these steps to connect them:

1. Turn tecla-e on
2. Turn Fusion or ATOM head array on
3. Put tecla-e in pairing mode by pressing and holding the on/off switch to the gear position for 5 seconds, you'll hear a beep and the light will go amber
4. Press the "BT Pair" button on the Fusion, on the ATOM use a paperclip to press the pinhole button to the right of the switch indicators 
5. When successful connected the BT light in the Fusion box should be solid or the main indicator will go solid

After it has been paired, we recommend that you first turn on the head array and then you turn the tecla-e device. They should reconnect automatically.

To set the head array to wireless mode press and hold the switch connected to the User Port until you hear a long beep.

After that you can put the tecla-e back in pairing mode to connect to an iPhone or iPad:
https://gettecla.zendesk.com/hc/en-us/articles/115004574614-Apple-TV-Switch-Control-tecla-e-

For more information on the Fusion, check out this page:
http://www.asl-inc.com/products/asl-110-fusion.php